Description

Introduction
The purpose of this exercise is to become familiar with the Quartus Prime CAD system that will be used for the first several lab exercises. This lab exercise will not be marked—the work is done on your own time, and on a computer outside of the lab rooms.
Introduction to the Quartus Prime CAD Software
Perform all of the steps of the tutorial up to Section 9. If you do not have access to the DE1-SoC lab board used in the course (that is, if you haven’t purchased one), then you will not be able to perform the FPGA programming step in Section 9. If you have your own DE1-SoC board, then you can perform the steps in Section 9.2 and Section 10.
Introduction to Quartus Prime Simulation
1