Description

For example, the following polynomial (the symbol ‘^’ is used to mean ‘raised to the power’):
4x^5 – 2x^3 + 2x +3
can be represented as the linked list of terms:
(3,0) -> (2,1) -> (-2,3) -> (4,5) where each term is a (coefficient,degree) pair.
Notes about representation:
• Terms are stored in ASCENDING order of degrees from front to rear in a non-circular linked list.
• Zero-coefficient terms are NOT stored.
• An EMPTY (zero) polynomial is represented by a linked list with NO NODES in it, i.e.
referenced by NULL.
• Coefficients are real numbers
• Degrees are POSITIVE integers, except if there is a constant term, in which case the degree is zero.
• There will not be more than one term in the same degree.
If you do not represent all your polynomials (the initial inputs as well as those you get out of doing arithmetic on polynomials) as above, you will lose credit even if your results are mathematically correct.
Implementation
At the bottom of the Autolab assignment page, under Attachments, you will see a polynomial_project.zip file. Download and unzip in your computer. You will see there are:
• 2 directories/folders o src: contains the folder poly with Node.java, Term.java, Polynomial.java, and Polytest.java
o bin: contains the folder poly with the class files after the assignment is compiled
• 4 files o ptest1.txt, ptest2.txt, ptest1opp.txt: input files containing polynomials
(described in the Running the Program section below)
o Makefile: used to automate building and executing the target program
You need to complete the implementation of the Polynomial class where indicated in the following methods:
Method Grading Points
evaluate 20
add 40
multiply 40
There is no formal requirement of efficiency for any of the methods. However, every test case run will be timed out after 3 seconds, which is plenty of time even for inefficient code. If your method is timed out on a test case you will get no credit for that test.
Note: You will get a zero if you use any other data structure (e.g. array/arraylist) anywhere in your implementation, for any reason, even if it has nothing to do with the actual polynomial operations. You must work with linked lists ONLY all the way through.
• Do not change Node and Term in any way. You will not be submitting them, and we will be using the original versions to test your Polynomial implementation.
• If you wish to change Polytest, feel free. You will not be submitting it, and we will not be using it to grade your Polynomial submission.
Observe the following rules while working on Polynomial.java:
• Only fill in the code in the methods add, multiply, and evaluate where indicated.
• In methods that return a Polynomial (add and multiply), the polynomial that is returned must be represented as described in the “Notes about representation” part of the Background section above.
Your method will not get credit if the returned polynomial does not adhere to this representation, even it is mathematically correct.
Also see the “Notes about empty (zero) polynomials” at the end of the Running the program section below.
• DO NOT remove the package line at the top of the file.
• DO NOT remove any of the import statements.
• DO NOT add any import statements.
• DO NOT change the headers of ANY of the given methods
• DO NOT change/remove any of the given class fields
• DO NOT add any new class fields – this includes variables and classes.
• DO NOT use System.exit()
Before you submit, make sure to check your code against the original Polynomial.java, Term.java, and Node.java files to make sure you have adhered to the rules above.
Compiling and Executing
Once inside the polynomial directory, type:
• javac -d bin src/poly/*.java to compile
• java -cp bin poly.Polytest to execute
If you have a unix operating system (Linux or Mac OS) you CAN use the Makefile file provided. Once inside the polynomial directory type:
• make to compile
• make run to execute
• make clean remove all the .class files
Running the Program
There are three sample input files for you to test:
• A file ptest1.txt that contains the polynomial
4x^5 – 2x^3 + 2x + 3
• A file ptest2.txt that contains the polynomial
8x^4 + 4x^3 – 3x + 9
• A file ptest1opp.txt that contains the polynomial
-4x^5 + 2x^3 – 2x – 3
(the negation of the polynomial in ptest1)
In each of these files, each line is a term, with the first value being the coefficient, and the second value being the degree. The terms are listed in descending order of degrees and the respective non-zero coefficients. Remember that when you store a polynomial in a linked list, you will store it in ascending order of degrees. (This is actually already implemented by the Polynomial constructor when it reads a polynomial from an input file. All you have to do is make sure you stick with this rule when you add and multiply.)
Here’s a sample run of the driver, Polytest. Apart from ptest1.txt, ptest2.txt, and ptest1opp.txt, a fourth test polynomial file, ptestnull.txt is also used. This is an empty file that stands for a null (zero) polynomial – you will need to create this yourself. See notes after the test run for special instructions regarding zero polynomials.
Enter the name of the polynomial file => ptest1.txt

4.0x^5 + -2.0x^3 + 2.0x + 3.0

1. ADD polynomial
2. MULTIPLY polynomial
3. EVALUATE polynomial
4. QUIT
Enter choice # => 1
Enter the file containing the polynomial to add => ptest2.txt

8.0x^4 + 4.0x^3 + -3.0x + 9.0

Sum: 4.0x^5 + 8.0x^4 + 2.0x^3 + -1.0x + 12.0

1. ADD polynomial
2. MULTIPLY polynomial
3. EVALUATE polynomial
4. QUIT
Enter choice # => 1
Enter the file containing the polynomial to add => ptest1opp.txt

-4.0x^5 + 2.0x^3 + -2.0x + -3.0

Sum: 0

1. ADD polynomial
2. MULTIPLY polynomial
3. EVALUATE polynomial
4. QUIT
Enter choice # => 1
Enter the file containing the polynomial to add => ptestnull.txt

0

Sum: 4.0x^5 + -2.0x^3 + 2.0x + 3.0

1. ADD polynomial
2. MULTIPLY polynomial
3. EVALUATE polynomial
4. QUIT
Enter choice # => 2
Enter the file containing the polynomial to multiply => ptest2

8.0x^4 + 4.0x^3 + -3.0x + 9.0

Product: 32.0x^9 + 16.0x^8 + -16.0x^7 + -20.0x^6 + 52.0x^5 + 38.0x^4 + 6.0x^3 + -6.0x^2 + 9.0x + 27.0

1. ADD polynomial
2. MULTIPLY polynomial
3. EVALUATE polynomial
4. QUIT
Enter choice # => 3 Enter the evaluation point x => 2
Value at 2.0: 119.0

1. ADD polynomial
2. MULTIPLY polynomial
3. EVALUATE polynomial
4. QUIT
Enter choice # => 4
The sample tests we have given you are just for starters. You will need to create other tests of your own on which you can run your code. For every test you run, be careful to keep your test input in the same format as the test files provided, otherwise Polytest will not work correctly. And make sure your test file is in the same folder as the other files, i.e. under Polynomial.
Note on translation from internal to output representation:
The toString method in the Polynomial class returns a string with the terms in descending order, fit for printing. (It processes the ascending ordered terms of the input linked list in reverse order.) For illustration, see how the addmethod in Polytest prints the resulting polynomial:
System.out.println(“Sum: ” +
Polynomial.toString(Polynomial.add(poly1,poly2)) + ” “); Notes about empty (zero) polynomials:
• If you want to test with an empty polynomial input, you should create a file with nothing in it. In Eclipse, you can do this by right clicking on the project name in the package explorer view, then selecting New, then selecting File. Give a name, and click Finish. You new file will show up under the project name folder in the package explorer view, and the file will be opened in the text editor view. But don’t type anything in the file.
• Remember that when you add two terms of the same degree, if you get a zero coefficient result term, it should not be added to the result polynomial. As listed in the “Notes about representation” in the Background section, zero-coefficient terms are not stored.
• The string representation of a zero polynomial is “0” – see the toString method of the Polynomial class. So, the Polytest driver will print a zero for a zero polyomial input, or a zero polynomial that results from an operation performed on two polynomials. Before submission
5. Submitting the assignment. Submit Polynomial.java separately via the web submission system called Autolab. To do this, click the Assignments link from the course website; click the Submit link for that assignment.